Developing on NVIDIA® Jetson™ for AI on the Edge

Tag: Hacking

One of the projects I’ve been working on required a Pan and Tilt mechanism. Both pan and tilt controls are controlled by servo motors, which could be controlled by the […]
In a previous entry, we discussed how to preview webcams. In this article, we’ll discuss a Server which saves both video and audio to a file, and streams video over […]
When Dan Ingalls and a group of researchers created the BitBlt routine for the Xerox Alto computer in 1975 at Xerox PARC, that set the stage for the invention of […]
Enzotech CNB-R1 be gone! Bring in the big guns and be done with heat sink fiddlin’. After installing an Enzotech CNB-R1 onto a NVIDIA Jetson TK1, the results were a […]
A few days ago I installed a Enzotech CNB-R1 Heat Sink onto a Jetson TK1. As noted in earlier posts, with the heat sink installed the Jetson tends to run […]
After installing the Enzotech CNB-R1 Northbridge heat sink, I ran a temperature test using the CUDA Smoke Demo. Basically start up the demo, and take temperature readings over the next […]
The NVIDIA Jetson TK1 is a nice development board. With that said, the little CPU fan cooler squeals like a stuck pig. It’s not horrible when you’re in a noisy […]
Porting to a new platform is rarely easy. The steps are pretty straightforward, but all the niggles add up to make it easy to fiddle away the better part of […]
This is the second progress video about the port of openFrameworks to the Jetson. The demonstration sketch shows that most of the OpenGL issues have been sorted out. Also, this […]
Being a new development board, I’ve been a little leery to add peripherals that require driver support. In part, this was due to my first experiences trying to get wireless […]

Disclaimer

Some links here are affiliate links. If you purchase through these links I will receive a small commission at no additional cost to you. As an Amazon Associate, I earn from qualifying purchases.

Books, Ideas & Other Curiosities