JetsonHacks

Developing on NVIDIA® Jetson™ for AI on the Edge

Articles

Motor Control Discussion
In the tenth part of our Jetson RACECAR build we discuss how to control the drive motor and steering servo. Then we discuss battery selection to power the electronic components […]
In the ninth part of the Jetson RACECAR build, we install the Sparkfun Razor IMU ROS package. Looky here: Background After installing the Sparkfun Razor IMU on the Jetson RACECAR, […]
In the eighth part of the Jetson RACECAR build, we start on the RACECAR software component. We build a custom kernel for the Jetson and then we install ROS. Looky […]
In this article, we’ll cover how to build a custom kernel for the NVIDIA Jetson TK1. Looky here: Background and Motivation Note: This article is for intermediate users. You should […]
In the seventh part of our Jetson RACECAR build, we add a Sparkfun Razor 9DOF IMU to the lower platform. Looky here: Background The Sparkfun 9 Degrees of Freedom Razor […]
In this article, we cover ROS installation of the Intel RealSense Camera on the NVIDIA Jetson TK1. Note: This article was updated 9-9-16. Looky here: Background Note: This article is […]
Installation of the Intel RealSense Cameras on the Jetson TK1 is made possible by the use of the open source library librealsense. Looky here: Background Note: This article is intended […]
The Intel RealSense Camera is a RGBD (Red, Green, Blue, Depth) camera which fits a large amount of imaging technology into a small package. Looky here: Background Over the last […]
mLab at the University of Pennsylvania has built a website for building an Autonomous Race Car (ARC). The compute platform of the race car is a Jetson TK1. Looky here: […]
Viraj Padte from Oklahoma has been working on building a JetsonBot based on the articles posted on JetsonHacks. Background Viraj has a bachelor’s degree in Electronics and Telecommunications Engineering. Viraj […]

Disclaimer

Some links here are affiliate links. If you purchase through these links I will receive a small commission at no additional cost to you. As an Amazon Associate, I earn from qualifying purchases.

Books, Ideas & Other Curiosities