Articles
- March 29, 2023
- No Comments
JetPack 5.1.1 is the new production release for the full NVIDIA Jetson Orin and Jetson Xavier family of hardware. It adds support for the newly announced Jetson Orin Nano Developer […]
- March 22, 2023
- 20 Comments
The NVIDIA Jetson Orin Nano Developer Kit reveal at GTC 2023 introduces a new mid-range monster to the Jetson lineup. Looky here: Introduction This new addition to the Jetson lineup […]
- February 7, 2023
- 16 Comments
When the pros first setup their Jetsons, one of the first tools they install is jtop. jtop is a command line tool written by Raffaello Bonghi, one of the original […]
- January 25, 2023
- 4 Comments
JetPack 5.1 is the new production release for the NVIDIA Jetson Orin and Jetson Xavier family of hardware. The JetPack 5.1 release includes the Jetson Linux 35.2.1 BSP with Linux […]
- January 24, 2023
- No Comments
The NVIDIA Jetson Orin NX 16GB module is now available worldwide. Orin NX Specifications The official NVIDIA Technical Blog has a good writeup: Boost Edge AI Performance with the New […]
- January 23, 2023
- No Comments
Seeed Studio earlier this month announced the reComputer J4012. The new NVIDIA® Jetson Orin™ NX system-on-module powers the reComputer J40. Here’s the press release. reComputer J4012 Quick Specs The reComputer […]
- December 31, 2022
- 2 Comments
Another year has flown by. To be honest, I am not a big fan of 2022. I am not an optimist by nature, but even I feel that the 2020s […]
- November 25, 2022
- 6 Comments
It’s been a while, but the supply chain issues are now behind us. The Jetson Developer Kit is back! The price has been bumped up to $149, and is available […]
- November 10, 2022
- No Comments
Setting up Man Pages for Jetson Linux is easy under JetPack 5, but a few tricks are required for JetPack 4. Looky here: Background If you develop on a Linux […]
- November 3, 2022
- 4 Comments
Upgrading your Jetson Xavier NX from JetPack 4 to JetPack 5 is not difficult. However, there are a few things to understand. As always, make backups and don’t put your […]