JetsonHacks

Developing on NVIDIA® Jetson™ for AI on the Edge

Category: Jetson TX2

Jetson TX librealsense
Intel RealSense cameras can use an open source library called librealsense as a driver for the Jetson TX1 and TX2 development kits. Looky here: Background With the release of L4T […]
Today NVIDIA released JetPack 3.1 which introduces L4T 28.1 with production support for both the NVIDIA Jetson TX1 and Jetson TX2 Development Kits. Also new is TensorRT 2.1, cuDNN 6.0 […]
Note: An updated article for this subject is available: Install ROS on Jetson TX. This article is left for historical reasons. Robot Operating System (ROS) was originally developed at Stanford […]
NOTE: There is an updated article for use with L4T 28.1 (JetPack 3.1) and above. Please see: Intel RealSense Camera librealsense – NVIDIA Jetson TX Dev Kits Intel RealSense cameras […]
Note: This article has been updated. Please see the L4T 28.1 build article. This article covers building a kernel for L4T 27.1. If you are trying to build a kernel […]
JetPack 3.0 is a tool that installs the software tools and operating system for a Jetson Development Kit. In the following video, JetPack installs on a Jetson TX2 Development Kit. […]
For some “weekend benchmarking fun” Michael Larabel over at Phoenix did an ARM board comparison which included the new Jetson TX2. Here’s the link: Benchmarks Of Many ARM Boards From […]
Today NVIDIA began shipping a new product, the Jetson TX2 Development Kit. The Jetson TX2 is available on Amazon. Looky here: Jetson TX2 Overview The Jetson TX2 is a new […]

Disclaimer

Some links here are affiliate links. If you purchase through these links I will receive a small commission at no additional cost to you. As an Amazon Associate, I earn from qualifying purchases.

Books, Ideas & Other Curiosities