JetsonHacks

Developing on NVIDIA® Jetson™ for AI on the Edge

Category: Article

Jetson RACECAR Lower Platform
Time to put the lower platform together and do a test fit. Looky here: Lower Platform Build The lower platform consists of four major components: VESC – Electronic Speed Controller […]
The Stereolabs ZED Camera is introducing SDK 2.0 which includes support for the Jetson TX1 and Jetson TX2. Looky here: Background The ZED Camera is a stereo depth sensor which […]
Note: This article has been updated for L4T 28.2. Please see Build OpenCV 3.4 with CUDA on NVIDIA Jetson TX2 As a developer, sometimes you need to build OpenCV from […]
In a post on the NVIDIA Jetson TX1 forum, Wilkins White (Atrer) from Nova Dynamics (ww@novadynamics.com) wrote up a quite wonderful explanation of how to enable SPI on the Jetson […]
The green flag is back out, and the Jetson RACECAR project is starting again! The Jetson RACECAR is a ROS based, 1/10 scale, R/C car platform autonomous vehicle. The Jetson […]
Note: There is an updated article for installing TensorFlow 1.3 on the Jetson TX2 running L4T 28.1. The repository for these scripts has been updated. Please make sure to checkout […]
In a previous article about SSDs we had a chat in the video about flash memory types. Ivan R commented on the JetsonHacks YouTube channel: Jim, I’ve noticed a lot […]
Installing a Solid State Disk (SSD) on a Jetson TX2 is good, clean fun. Looky here: Background Serial-ATA drives are used in many desktop and laptop computers. While this article […]
Intel provides an open source ROS package for their RealSense Cameras. Let’s install the package on the Jetson TX2. Looky here: Background Intel is investing heavily in computer vision hardware, […]
Note: An updated article for this subject is available: Install ROS on Jetson TX. This article is left for historical reasons. Robot Operating System (ROS) was originally developed at Stanford […]

Disclaimer

Some links here are affiliate links. If you purchase through these links I will receive a small commission at no additional cost to you. As an Amazon Associate, I earn from qualifying purchases.

Books, Ideas & Other Curiosities