kangalow, Author at JetsonHacks

JetPack 3.0 – NVIDIA Jetson TX2 Development Kit

March 21, 2017
43 Comments

JetPack 3.0 is a tool that installs the software tools and operating system for a Jetson Development Kit. In the following video, JetPack installs on a Jetson TX2 Development Kit. […]

ARM Board Comparison – NVIDIA Jetson TX2

March 19, 2017
2 Comments

For some “weekend benchmarking fun” Michael Larabel over at Phoenix did an ARM board comparison which included the new Jetson TX2. Here’s the link: Benchmarks Of Many ARM Boards From […]

NVIDIA Jetson TX2 Development Kit

March 14, 2017
37 Comments

Today NVIDIA began shipping a new product, the Jetson TX2 Development Kit. The Jetson TX2 is available on Amazon. Looky here: Jetson TX2 Overview The Jetson TX2 is a new […]

Daniel Tobias’ CAR – Cherry Autonomous Racecar

March 2, 2017
5 Comments

Daniel Tobias created a Jetson based autonomous vehicle named the Cherry Autonomous Racecar (CAR) for his senior design project at North Carolina A&T State University. Daniel was gracious enough to […]

Install Qt Creator on NVIDIA Jetson TX1

January 31, 2017
21 Comments

Here we have a short article on installing Qt Creator on the NVIDIA Jetson TX1. Looky here: Note: This article is about installing Qt Creator 3.3.1 for Qt 5.5.1 on […]

Select Boot Device from Serial Console – NVIDIA Jetson Development Kit

January 29, 2017
8 Comments

Just a short article on how you can select the boot device from the serial console of a NVIDIA Jetson Development Kit. Looky here: Background In the last few articles, […]

Install Samsung SSD on NVIDIA Jetson TX1

January 28, 2017
36 Comments

Note: This article has been updated for L4T 28.1. See: Develop on SSD – NVIDIA Jetson TX1 and Jetson TX2 This is the third in a series of short articles […]

Run Jetson TX1 from USB Drive

January 27, 2017
8 Comments

This is a the second in a series of short articles about running the Jetson TX1 from external storage. This article discusses copying the contents of the internal flash memory […]

Run Jetson TX1 from SD Card

January 26, 2017
39 Comments

This is a short article on copying the contents of the internal flash memory of a NVIDIA Jetson TX1 over to a SD card, and then running the Jetson from […]

Building TensorFlow Update – Jetson TX1

January 15, 2017
One Comment

Here’s a quick update on building TensorFlow for the NVIDIA Jetson TX1. Late last month, we looked at installing TensorFlow on the Jetson TX1. Of course, we are talking about […]

JetsonHacks

Author: kangalow