Articles
- February 15, 2016
- No Comments
In the fifth part of our Jetson RACECAR build, the lower platform mounting commences, along with the attachment of a Jetson Development Kit. Looky here: Background As we discussed about […]
- February 9, 2016
- 11 Comments
In the fourth part of our Jetson RACECAR build, we are going to discuss platform mounting where the computer, sensors and other components will be placed. Also, we’re going to […]
- February 3, 2016
- 15 Comments
Stereolabs ZED Camera is billed as “The World’s First High Definition 3D Camera for Depth Sensing”. One of the main applications for the ZED is robotic vision, which is a […]
- February 1, 2016
- 9 Comments
The Autonomous Deep Learning Robot is a TurtleBot 2 compatible robot which uses a NVIDIA Jetson TK1 Development Kit for its processor. The company Autonomous recently began delivery of the […]
- January 29, 2016
- 4 Comments
In some earlier articles, we installed the Bosch BNO055 on both the NVIDIA Jetson TK1 and Jetson TX1 development kits. However, the explanation for installation on the Jetson TK1 was […]
- January 26, 2016
- 17 Comments
In the third part of our Jetson RACECAR build series, we are working through controlling the ESC motor controller. Looky here: Background In an R/C car such as the TRAXXAS […]
- January 20, 2016
- 19 Comments
In the first article on the Jetson RACECAR project we described several tasks that need to be completed. The first task on the list that we’ve chosen to work on […]
- January 18, 2016
- 18 Comments
This is the first of a multi-part series on building a Rapid Autonomous Complex-Environment Competing Ackermann-steering Robot, or RACECAR, based on a NVIDIA Jetson Development Kit and Traxxas Rally Remote […]
- January 14, 2016
- 2 Comments
Dr. David Cofer over at NeuroRoboticTech has posted an update on the Jetduino Interface Board project for the NVIDIA Jetson TK1 Development Kit. Jetduino Project Update You may remember for […]
- January 11, 2016
- 22 Comments
Another couple of devices that will be needed for upcoming projects on the Jetson TX1 Development Kit are an IMU and a PWM driver for servo control. These devices can […]