JetsonHacks

Developing on NVIDIA® Jetson™ for AI on the Edge

Articles

Jetson RACECAR with Upper Platform
In the sixth part of our Jetson RACECAR build, the upper platform is mounted to the lower platform and the initial test fitting commences. Looky here: Background As noted in […]
At Embedded World 2016 in Nuremberg, Germany this week several different carrier boards for the NVIDIA Jetson TX1 module were being displayed by Auvidea and Connect Tech Inc. Over the […]
Image recognition in about 10ms on a Jetson TX1! In an earlier article on running Caffe on the Jetson TX1 we stated that when cuDNN library version 4 support was […]
Daniel Bräckelmann from Team ISF Löwen recently shared details of their vehicle used in the Carolo-Cup challenge earlier this month. Simba 2 won the hardest challenge of the competition, the […]
In the fifth part of our Jetson RACECAR build, the lower platform mounting commences, along with the attachment of a Jetson Development Kit. Looky here: Background As we discussed about […]
In the fourth part of our Jetson RACECAR build, we are going to discuss platform mounting where the computer, sensors and other components will be placed. Also, we’re going to […]
Stereolabs ZED Camera is billed as “The World’s First High Definition 3D Camera for Depth Sensing”. One of the main applications for the ZED is robotic vision, which is a […]
The Autonomous Deep Learning Robot is a TurtleBot 2 compatible robot which uses a NVIDIA Jetson TK1 Development Kit for its processor. The company Autonomous recently began delivery of the […]
In some earlier articles, we installed the Bosch BNO055 on both the NVIDIA Jetson TK1 and Jetson TX1 development kits. However, the explanation for installation on the Jetson TK1 was […]
In the third part of our Jetson RACECAR build series, we are working through controlling the ESC motor controller. Looky here: Background In an R/C car such as the TRAXXAS […]

Disclaimer

Some links here are affiliate links. If you purchase through these links I will receive a small commission at no additional cost to you. As an Amazon Associate, I earn from qualifying purchases.

Books, Ideas & Other Curiosities