Developing on NVIDIA® Jetson™ for AI on the Edge

Jetson Xavier NX Pinout now up

Some of the more popular pages on JetsonHacks are the pinouts for the GPIO headers on each of the Jetson developer kits. Here’s a new one for the Xavier NX!

The Jetson Xavier NX GPIO J12 Header Pinout gathers together some of the information that’s spread over several documents such as the sysfs number for the GPIO pins, I2C bus numbers and the device of the UART and places it in one place. Plus there’s a bunch of fun colors!

You will need a NVIDIA Jetson Xavier NX Developer Kit, of course.

Go check it out.

Pin 1 - Jetson Xavier NX
Pin 1 – Jetson Xavier NX

5 Responses

  1. Yes confirmed , tested /dev/ttyTHS0 @ 921600bps on my Flight Controller(PixHawk 2.4.48).
    Thanks for giving us references and tools.

  2. Just checking if they are all the USB a’s are 3.1 and have the same specs, I’ve gotten conflicting information from other sources, and when I use my RealSense in different ports I am seeing some performance changes.
    Thanks for the replies and info.

Leave a Reply

Your email address will not be published. Required fields are marked *


Some links here are affiliate links. If you purchase through these links I will receive a small commission at no additional cost to you. As an Amazon Associate, I earn from qualifying purchases.

Books, Ideas & Other Curiosities