JetsonHacks

Developing on NVIDIA® Jetson™ for AI on the Edge

Tag: Tutorial

Upgrade Python on Jetson Nano – Tutorial

June 12, 2023
9 Comments

If you have a Jetson running JetPack 4, you can upgrade your Python version from the default Python 3.6. Looky here: Background The current JetPack 4 release installs Jetson Linux […]

Jetson Orin Nano Tutorial: SSD Install, Boot, and JetPack Setup

May 30, 2023
61 Comments

The NVIDIA Jetson Orin Nano Developer Kit can boot from a Solid State Drive (SSD). You can set up your Orin Nano in under 45 minutes from the command line. […]

Jetson Orin Nano – Flashing QSPI Firmware for More Memory

May 26, 2023
6 Comments

Early production units of the NVIDIA Jetson Orin Nano Developer Kits can flash their QSPI firmware to gain one more gigabyte of system memory. Looky here: Introduction When you first […]

Using the Jetson Orin Nano with CSI Cameras

April 5, 2023
18 Comments

The NVIDIA Jetson Orin Nano Developer Kit includes two 22 pin MIPI-CSI cameras. The Raspberry Pi v2.1 camera uses a 15 pin connector. You need to install an adapter cable […]

Disclaimer

Some links here are affiliate links. If you purchase through these links I will receive a small commission at no additional cost to you. As an Amazon Associate, I earn from qualifying purchases.

Books, Ideas & Other Curiosities