JetsonHacks

Developing on NVIDIA® Jetson™ for AI on the Edge

Category: Software

OpenCV, Python, Onboard Camera – NVIDIA Jetson TX2

September 8, 2017
10 Comments

In this article, we build a simple demonstration of a Canny Edge Detector using OpenCV, Python, and the onboard camera of the NVIDIA Jetson TX2 Development Kit. Looky here: Background […]

JetPack 3.1 Release

July 24, 2017
8 Comments

Today NVIDIA released JetPack 3.1 which introduces L4T 28.1 with production support for both the NVIDIA Jetson TX1 and Jetson TX2 Development Kits. Also new is TensorRT 2.1, cuDNN 6.0 […]

Jetson RACECAR Build – Software Install

April 26, 2017
17 Comments

The software install for the Jetson RACECAR is a multi-step process. Looky here: Background There are a couple of different ways to install the software for the Jetson RACECAR. The […]

JetPack 3.0 – NVIDIA Jetson TX2 Development Kit

March 21, 2017
43 Comments

JetPack 3.0 is a tool that installs the software tools and operating system for a Jetson Development Kit. In the following video, JetPack installs on a Jetson TX2 Development Kit. […]

Install Qt Creator on NVIDIA Jetson TX1

January 31, 2017
21 Comments

Here we have a short article on installing Qt Creator on the NVIDIA Jetson TX1. Looky here: Note: This article is about installing Qt Creator 3.3.1 for Qt 5.5.1 on […]

Using Code::Blocks on Jetson

January 9, 2016
6 Comments

Jetsonhacks himself has been kind enough to let a fellow jetsonhacker have a hand at adding some blog posts…so here goes. I’ll just do a real quick intro of myself: […]

Ultrasonic Distance Sensor – HC-SR04 – NVIDIA Jetson TK1

October 29, 2015
12 Comments

Ultrasonic Distance Sensors, like the HC-SR04, are an inexpensive way to measure distance from the Jetson TK1. Looky here: Background Echo location is used by echolocating animals, such as bats […]

Install Qt Creator on NVIDIA Jetson TK1

April 22, 2015
14 Comments

For the next project, Qt Creator is needed. Here’s a little video showing the installation on a NVIDIA Jetson Tk1 Development Kit. Looky here: Nothing difficult here. Open up a […]

Disclaimer

Some links here are affiliate links. If you purchase through these links I will receive a small commission at no additional cost to you. As an Amazon Associate, I earn from qualifying purchases.

Books, Ideas & Other Curiosities