Category: Operating System

The introduction of the Jetson Nano 2GB ships with a different desktop environment than the other Jetsons. The desktop environment is LXDE. You can change over to this desktop environment […]

An often asked question is “How do I backup the SD card for a Jetson Nano or Jetson Xavier NX?” Here’s an answer, “Let’s use the dd tool”! Looky here: […]

Once you have your Jetson all setup the way you like it, back it up! Nuts and Bolts If you are only interested in a backup method, we’ve written some […]

The JetPack 4.4 Over The Air (OTA) updates issue that some folks encountered on on the first couple of days of the release have been fixed! Life be good again. […]

NOTE: THIS ARTICLE HAS BEEN UPDATED WITH AN EASIER METHOD. PLEASE SEE: Jetson Nano – Run From USB Drive. Using a USB Drive as the root file system on a […]

There are times when you need to have your external drives mounted when the Jetson Nano boots. Let’s go over it! Looky here: Introduction The Ubuntu documentation has a good […]

A quick note, the repository for building the Linux kernel onboard the NVIDIA Jetson TX2 development kit has been updated. The repository is on the JetsonHacks account on Github, buildJetsonTX2Kernel. […]

Note (September, 2021): While not officially deprecated, this article points to the outdated JetsonHacks Github repository buildJetsonTX2Kernel. The later L4T versions for building the Jetson kernel and modules are now […]

Have you experienced plugging in a USB device, and the Jetson not recognizing it? Sometimes all you need is the right USB to Serial Convert Kernel Module! Looky here: Background […]

A USB ttyACM device cannot be accessed on a stock L4T 28.1 installation. In this article, we cover installation of a prebuilt cdc-acm module on the NVIDIA Jetson Dev Kits […]