Category: Jetson Orin
- April 15, 2025
- No Comments
After hundreds of articles and videos on JetsonHacks, I want to share one of the tricks the pros use for initial setup: shell setup scripts. Looky here: Background At first […]
- April 7, 2025
- 2 Comments
With the advent of JetPack 6.2, there have been some changes to how the Jetson Orin Developer Kits handle GPIO. By default, GPIO is input-only. Let’s fix that. Looky here: […]
- March 20, 2025
- 3 Comments
The JetsonHacks Github repository offers kernel modules which allow you to install and run a RealSense camera in around 5 minutes. Looky here: Background The Intel RealSense cameras were some […]
- March 13, 2025
- No Comments
When developing on a Jetson Orin, you might need custom kernel modules or specific settings for your project. While NVIDIA recommends building on an x86 host, you can streamline the […]
- February 24, 2025
- No Comments
Updated March 1,2025 One of the changes from the previous version of JetPack versus JetPack 6 is that installing from a host x86 machine not install Docker by default. The […]
- December 17, 2024
- 16 Comments
A Holiday Surprise! NVIDIA Slashes the Jetson Orin Nano Developer Kit Price in Half to $249 – and It’s Faster! Note: Currently there is high demand for the Orin Nano […]
- September 30, 2024
- 8 Comments
JetPack 6.1 is now out and about in the world! This version of JetPack is for the NVIDIA Jetson Orin series, and will not work on earlier Jetsons. I’m especially […]
- May 30, 2023
- 63 Comments
The NVIDIA Jetson Orin Nano Developer Kit can boot from a Solid State Drive (SSD). You can set up your Orin Nano in under 45 minutes from the command line. […]
- May 26, 2023
- 8 Comments
Early production units of the NVIDIA Jetson Orin Nano Developer Kits can flash their QSPI firmware to gain one more gigabyte of system memory. Looky here: Introduction When you first […]
- April 5, 2023
- 18 Comments
The NVIDIA Jetson Orin Nano Developer Kit includes two 22 pin MIPI-CSI cameras. The Raspberry Pi v2.1 camera uses a 15 pin connector. You need to install an adapter cable […]
Disclaimer
Some links here are affiliate links. If you purchase through these links I will receive a small commission at no additional cost to you. As an Amazon Associate, I earn from qualifying purchases.
Recent Posts
- First Boot: Jetson Orin Setup with Script + LLM Help April 15, 2025
- Device Tree Overlays on Jetson: Scary but fun! April 7, 2025
- Jetson Orin + RealSense in 5 minutes March 20, 2025
- Build Jetson Orin Kernel and Modules March 13, 2025
- Jetson Orin Nano Super with the Raspberry Pi V2 and V3 Cameras March 4, 2025
- Docker Setup on JetPack 6 – Jetson Orin February 24, 2025