Category: Article
- January 9, 2015
- No Comments
Computación y Sistemas has published an interesting paper: Simulating and Visualizing Real-Time Crowds on GPU Clusters. Here’s the source of the paper: Computación y Sistemas. Several different NVIDIA GPUs were […]
- January 5, 2015
- 6 Comments
Walter Lucetti has step by step instructions on how to install OpenNI2 on the Jetson: http://myzharbot.robot-home.it/blog/software/configuration-nvidia-jetson-tk1/asus-xtion-pro-live-openni2-compilation-install-instructions/. These instructions are derived from this Jetsonhacks post: Building OpenNI2 for the Structure Sensor […]
- November 26, 2014
- 19 Comments
Note: This article is information about an older version of JetPack. Please see JetPack 2.0 Install for an updated version. One of the more intimidating tasks for newcomers to the […]
- November 26, 2014
- 15 Comments
This is just a short note on how to install OpenCV on the Jetson under Linux for Tegra (L4T) 21.1. Before the installation, you must install Linux for Tegra (L4T) […]
- November 19, 2014
- One Comment
Install CUDA 6.5 on a freshly flashed Linux for Tegra (L4T) 21.1. Also, the samples from the CUDA package are built, and a few of the graphics demos are shown. […]
- November 15, 2014
- 9 Comments
The release of Linux for Tegra (L4T) 21.1 for the NVIDIA Jetson TK1 brought with it the use of UBoot as the new kernel boot loader. UBoot makes it easier […]
- November 12, 2014
- 4 Comments
With the new Linux for Tegra (LT4) 21.1 release, I needed a new driver for a Intel 7260 Wireless mini PCIe card. You can read about my initial installation of […]
- November 12, 2014
- No Comments
YouTube user Sethu Jose did a nice little clip of Saliency Detection on the NVIDIA Jetson TK1. The code is based on this paper: A Model of Saliency-based Visual Attention […]
- November 8, 2014
- One Comment
In previous L4T releases, the USB port was enabled during the boot process by setting an environment variable, called OMDDATA to signify to Fastboot whether the full size Jetson USB […]
- November 5, 2014
- 4 Comments
With the release of the new version (21.1) of Linux for Tegra yesterday, we find ourselves installing the new version and booting up the Jetson after installation. There’s some great […]
Disclaimer
Some links here are affiliate links. If you purchase through these links I will receive a small commission at no additional cost to you. As an Amazon Associate, I earn from qualifying purchases.
Recent Posts
- JetsonHacks Newsletter Sample – August/September 2023 September 18, 2023
- Use These! Jetson Docker Containers Tutorial September 4, 2023
- JetPack SDK 5.1.2 Release Now Live! August 21, 2023
- Speech AI on NVIDIA Jetson Tutorial August 7, 2023
- Custom DNS – Faster Internet for Free! July 14, 2023
- NVIDIA Jetson News – June 2023 June 20, 2023