Developing on NVIDIA® Jetson™ for AI on the Edge

Day: April 22, 2015

the IMU with the top removed. Three gimbals, platform electronics, and the accelerometer and gyro package can be seen in this picture.
Here’s a little series on integrating an Inertial Measurement Unit (IMU) onto the I2C GPIO pins of the NVIDIA Jetson TK1. First, we’ll build an interface library, RTIMULib, to enable […]
For the next project, Qt Creator is needed. Here’s a little video showing the installation on a NVIDIA Jetson Tk1 Development Kit. Looky here: Nothing difficult here. Open up a […]


Some links here are affiliate links. If you purchase through these links I will receive a small commission at no additional cost to you. As an Amazon Associate, I earn from qualifying purchases.

Books, Ideas & Other Curiosities